Logitech G502 X LIGHTSPEED User Manual

G502 X PLUS | G502 X LIGHTSPEED Gaming Mouse FAQs 4
Setup instructions
1. Orientate the DPI Shift to fit your
preference or replace it by the
button cover to extend the grip
surface.
2. The receiver can be stored in
the mouse behind the door
when on the go.
3. The LIGHTSPEED Wireless USB-A
receiver is below the mouse in
the product tray.
Plug the USB-A cable connector
into your PC and the USB-C
connector into the receiver
extension adapter. Plug the
USB-A receiver into the adapter.
● The LIGHTSPEED Wireless receiver can also be plugged directly into your PC, but
using the cable and extension adapter will ensure a better connection and
easy access to the cable when you need to charge your mouse.

Logitech G502 X LIGHTSPEED Specifications

General

Sensor	HERO 25K
DPI Range	100 - 25, 600
Max Acceleration	40G
Max Speed	400 IPS
USB Report Rate	1000 Hz (1ms)
Wireless Technology	LIGHTSPEED Wireless
RGB Lighting	Yes, LIGHTSYNC RGB
Onboard Memory	Yes
Switch Type	Hybrid Optical-Mechanical Switches
Connectivity	Wireless
Buttons	13 programmable buttons
Dimensions	131.4 mm x 79.2 mm x 41.1 mm