USB powered operation
1. Set the mode switch to PC mode.
2. Connect the headset to the console using the USB cable.
Note: although set in PC mode, buttons do not operate when connected
to the PlayStation 4. Programming of lighting and buttons is not possible on the PlayStation 7.1 surround sound
is not available while connected to PlayStation. Volume wheel does not work on PlayStation.
PlayStation setup (settings)
1. Plug in headset via USB or 3.5mm cables
2. Open Settings
3. Select “Sound and Screen”
4. Select “Audio Output Settings”
5. Set “Output to Headphones” to “All Audio”
RGB LIGHTING ZONE CUSTOMIZATION
To Next Page
Loading...
