What to do if Logitech Universal Remote software is unable to communicate?
If your Logitech Universal Remote software is unable to communicate, try disabling any Internet security software you might have, including firewalls and anti-virus software.
What to do if my Logitech Universal Remote sends commands twice?
If your Logitech Universal Remote sends the command twice when pressing buttons in an Activity, try lowering the repeats for the device that is receiving the command.
General| LCD Size | 1.5" Diagonal |
|---|---|
| LCD Resolution | 96 x 64 |
| LCD Screen | Monochrome |
| Backlit keypad | Yes |
| Backlight Color | Orange |
| Power Source | 4 x AAA batteries |
| Power Type | Alkaline |
| Brands Supported | 5, 000+ |
| Devices Supported | 225, 000+ |
| Maximum number of devices per account | 15 |
| Learning Capabilities | Any IR Device |
| Supported Platforms | Windows 2000/XP/Vista MAC OS X 10.3 + |
| IR Learning | Yes (Up to 250 Khz) |
| IR Transmit | 15.625 kHz to 500 kHz |
| IR Transmitters | 2 |
| IR Transmission Range | Up to 30ft |
| Memory Type | Flash |
| Memory Amount | 512 KB |
| Warranty | 2 Years |
Weight and Dimensions| Weight | 5.4 oz (with battery installed) |
|---|---|
| Dimensions | 1.9” x 8.0” |
To Next Page