User Manual 600-Series Harmony Remote
looks for commands with these names to automatically assign them to the volume up and down buttons
on the Harmony remote.
Naming Conventions
When naming a command for which there is no default name on the Learn infrared commands feature, use the
following naming conventions to make button assignment and sharing infrared commands easier:
• Do not use spaces or special characters such as /, & or * in the name.
• Capitalize the start of words (e.g. NextDisc, ModeDigital).
• Start the command name with its main function (e.g. VolumeRearUp, VolumeRearDown,
VolumeFrontUp, VolumeFrontDown). This helps group related commands in lists.
• For infrared commands that select inputs (e.g. on a stereo receiver), start with the prefix “Input”. Do not
name the input based on what you have connected to your device, rather name it based on what it is
called on the front of the device, or on the remote control (e.g. InputAux, InputVideo1, InputTape,
InputDVD, Input VCR).
v. 1.2 page 8
To Next Page
Loading...
Need help?
General
