Logitech M505 - Disconnecting and storing your mouse; To disconnect the transceiver from the computer

12
Disconnecting and storing your mouse
This major section is intended to aid you in disconnecting your mouse from your computer. Properly
following these instructions will allow you to disconnect and store your mouse while minimizing the risk
of damaging it. If handled correctly, your mouse can last for many years.
This section includes two topics: to disconnect the transceiver from the computer and to store the mouse’s
transceiver.
To disconnect the transceiver from the computer
Correctly following these instructions can help your mouse last for many years. Each step is accompanied
by an image to aid comprehension.
Disconnecting your transceiver requires the mouse, the USB transceiver and the computer that the
transceiver is currently plugged into.
To disconnect the transceiver from the computer:
1. Turn the mouse over so that the on/off switch is visible. This will allow you to turn off the
mouse.