Logitech MouseMan - Troubleshooting

Button Assignments under Windows 3.1
MouseWare allows you to assign functions to mouse buttons and replaces frequently
used tasks, such as double click, drag lock, etc., to a single button click. To override
a button assignment temporarily so you can use an application-specific feature, press
the Control key while clicking the button to be overridden.
Troubleshooting
When using the mouse, you may encounter one of two problems: the cursor does not
move smoothly or the mouse is not detected the by computer. To improve cursor
movement, refer to “Maintaining the Mouse” to clean the mouse ball and ball cage.
To remedy a mouse not detected problem, try the following:
e Make sure the mouse cable is plugged into the right port—serial or PS/2. When
installing the mouse, connect the mouse cable before installing the mouse software.
Reboot the system.
e Make sure your serial (or PS/2) port has the proper configuration.
Refer to your computer documentation for the correct port configuration.
e You may have other system devices (e.g., a modem card) that conflict with
the mouse. Check the IRQ/address settings of these devices for conflicts, and change
the settings as required. If the problem persists, please contact technical support.