14 ENGLISH
COMBINED PEDALS
This is usually only required if using very old racing titles.
Pedals on older racing wheels would often only have
abrake and a gas pedal, with each pedal representing
one half of the same axis. Combined Pedal mode
changes the default conguration of the PRO Racing
Pedals from fully separate axes for the brake and
thegas, to a combined mode, so that you should still
be able to use them in older titles that don’t support
pedals with separate axes.
It is highly recommended for the vast majority of racing
titles that this box is therefore left unticked, in order
toget the most out of your PRO Racing Pedals.
RECOMMENDED MAINTENANCE
Your PRO Racing Pedals have been engineered tocontinue
tooperate for many hundreds of hours and feel as good as
theydid when you rst started using them. As with your real car
though, it is recommended to keep them clean by performing
some simple, semi-regular maintenance.
Regular maintenance (weekly)
Clean the base and each pedal with a damp, lint-free cloth,
ensuring that there is no excess water present inthe cloth
Every 200 hours
Remove any excess built-up grease (especially on thebrake
pedal) using a clean cloth or piece of kitchen towel.
Reapplynewgrease (sparingly) to ensure continued smooth
operation of thepedals.
If you run out of the supplied grease then you may source
areplacement of your own. However, you must only use
asilicone-based grease/lubricant in order to prevent any issues.
Petroleum-based lubricants or Gasoline and Hydrocarbon
solvents must NOT be used as they will degrade the components
used in the pedals.
QUESTIONS?
logitechG.com/support/pro-pedals
To Next Page
Loading...