Logitech RALLY PLUS

LOGITECH RALLY AND RALLY PLUS IMPLEMENTATION GUIDE
p19

a. MAKE RALLY THE DEFAULT DEVICE: Ensure that Rally is chosen as the camera, speaker,
and microphone in your video conferencing applications and the operating system.
Please consult the conferencing application documentation for further instructions on
how to do this.
 
 
b. STARTING A VIDEO CALL: After installing Rally and ensuring it is the default device in
your video conferencing application, simply start the application in the normal manner
and enjoy the benets of improved audio and video.
c. CONSUMER ELECTRONICS CONTROL (CEC): CEC allows commands to be sent over
HDMI to CEC enabled products. When the displays are connected to the Display Hub
via HDMI, a signal to turn display on will be sent when:
 
 

 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 