6 English
CONNECT YOUR CAMERA
Connecting Rally Camera is the same
whether you plan on using a dedicated
computer in the room, or your team
members bring a laptop to the room
to run the meeting.
1. Plug the power splitter USB pigtail
into the USB port of the camera.
2. Connect the power adapter from
the power splitter to a wall outlet.
3. Connect the USB cable from
the power splitter to your computer.
4. The status LED will ash when
the camera is connecting.
Once complete, the camera head
will rotate.
5. If issues persist, consult
www.logitech.com/support/
rallycamera or call technical support.
To Next Page
Loading...
