Logitech SIGNATURE SLIM COMBO MK955 COPILOT - Page 6

6English
Connect your keyboard and mouse tomultiple
devices
There are 3 Easy-Switch keys each on your keyboard
and the back of your mouse. Connect one device
toeach of them.
When you go through the steps above, the rst
Easy-Switch key on the keyboard and mouse should
be connected to one device already.
STEP 1:
a. To connect to a second device, press the second
Easy-Switch key for 3 seconds to put it on pairing
mode. The LED light will start blinking.
b. Continue with any of the pairing methods above
based on how you connected to your rst device.
Use the image on the le as an example,
ifyou’ve connected your rst device with
aLogiBolt receiver, your second device
canbepaired via Bluetooth
®
.
NOTE: Please be advised that you can use
Bluetooth
®
connection on all the Easy-Switch
keys but the Logi Bolt receiver can only be used
in one of them.
c. Use the same process to pair an additional
device to the third Easy-Switch key.
1
2
3
2
1
3
1
2
3
3 sec.
Logi Bolt
receiver