Logitech Squeezebox
BOOfT
set
up Squeezebox
Boom
and
connect it
to
your
netvvork
1.
Slide open the battery compartment door
on
the remote
to
expose the battery, peel
the
protective tab from
the
battery, and then close the battery compartment door.
2.
Optional:
If
you'd prefer to connect to your network using a wired connection,
connect your own ethernet cable now.
3.
Slide the plug adapter into
the
power supply and make sure
it
snaps
into place.
Plug
the
barrel connector into
the
AC
input on Squeezebox Boom's rear panel.
4.
Plug
the power supply into
an
electrical outlet. Squeezebox Boom will automatically
power on.
5.
Press
RIGHT
on the remote, or
press
the scroll wheel on
the
front panel.
(As
covered
in
Getting
to
know Squeezebox Boom, the
UP
and
DOWN
buttons
on
the
remote perform the same function
as
turning the wheel
left
or right.
Pressing
RIGHT
on the remote performs
the
same
function
as
clicking
the
wheel.
For
the rest of this
section, we'll refer to using the various buttons on the remote,
but
you
can
use
the
scroll wheel
as
well.)
6.
You'll
see
a menu giving you the choice of connecting
via
a wired or wireless
network.
Use
the
UP
and
DOWN
buttons to make your selection, and
press
RIGHT.
12
To Next Page
Loading...
