Logitech Squeezebox Boom User Manual

Quick start quide
To check the IP address of the computer running SqueezeCenter, open SqueezeCenter's
web interface, click
Settings, and then the Status tab. The IP address will be listed
under
the SqueezeCenter Information section.
To check the IP address of the Squeezebox Boom, go to Settings> Information>
Player Information from the Squeezebox Boom's home screen. Scroll through the
Player Information screen until you see the IP address.
An IP address is four sets of numbers. Two IP addresses are on the same segment if
the first three
sets of numbers match. For example, these addresses are on the same
segment:
192.168.1.110 and 192.168.1.114
But these two are not; notice that the third set of numbers does not match:
192.168.1.110 and 192.168.16.103
If Squeezebox Boom and your computer are not on the same network segment, you
will need
to configure your wireless network so that both are on the same segment and
connect
to the same DHCP server for their IP addresses. You may need to consult the
party
who installed or maintains your network for assistance.
23

Logitech Squeezebox Boom Specifications

General

RMS rated power	30 W
Integrated clock	Yes
Connectivity technology	Wired & Wireless
Compatible operating systems	Windows XP/2000/NT, Windows Vista, Macintosh OSX 10.3.5, Linux/BSD/Solaris (Perl 5.8.3)
Ethernet LAN (RJ-45) ports	1
Networking features	10/100Base-T, 802.11g
Product color	Black
Audio formats supported	AAC, AIFF, FLAC, MP3, Ogg, WAV, WMA
Image formats supported	Not supported
Minimum RAM	256 MB
Minimum processor	Pentium 733MHz
Minimum storage drive space	80 MB
Minimum system requirements	Ethernet / 802.11b/g