Logitech Ultrathin Setup Guide

UltraThin - Magnetic clip-on keyboard cover - For iPad mini and iPad mini with Retina display
5 English
Charge the batteries
USB
1. Plug one end of the micro-USB cable into
the charging port, and the other end into
a USB port on your computer.
Alternatively you can use a USB charger,
such as that provided with your iPad
mini, providing the power output rating
is 5V and at least 500mA.
The status light blinks green as the
battery charges.
2. Charge the batteries until the Status light
turns solid green.
Battery information:
• A fully charged battery provides about
3 months of power when the Keyboard
Cover is used about two hours a day.
• Charge the batteries when the Status
light briefly turns red after the Keyboard
Cover turns on.
• When not in use, turn o the Keyboard
Cover to conserve battery power.
• The Keyboard Cover enters sleep mode
if powered on and not used. To exit
sleep mode, press any key.

Logitech Ultrathin Specifications

General

Cover	Yes
Compatibility	iPad mini\\r iPad mini Retina
Product color	Gray
Brand compatibility	Apple
Numeric keypad	No
Keyboard layout	QZERTY
Keyboard language	Italian
Keyboard form factor	Mini
Mobile operating systems supported	iOS
Battery type	Built-in battery
Power source	Battery
Charging source	USB
Wireless range	10 m
Device interface	Bluetooth
USB 2.0 ports quantity	1
Connectivity technology	Wireless

Weight and Dimensions

Depth	139 mm
Width	199.6 mm
Height	6.4 mm
Weight	210 g