EasyManua.ls Logo

Logitech Z906

Logitech Z906
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English 8
LEVEL SELECTION
Use the level select button on the remote control or
the control console to adjust the volume of the system.
Dierentlevel adjustment mode are applied under
dierenteects.
1. Stereo 3D - Adjust the volume of the whole system
(5satellites + 1 subwoofer), the subwoofer, rear satellites,
orthe center satellite.
2. Stereo 4.1 - Adjust the volume of the 4 satellites and
1subwoofer, the subwoofer, or the rear satellites.
3. Stereo 2.1 - Adjust the volume of the 2 front satellites
andthe subwoofer or the subwoofer.
4. No Eect - Level select options are same as stereo 3D.
INPUT
2
1
3
4
5
AUX
INPUT EFFECT LEVELMUTE
3D
4.5
2.1
DECODE
STEREO
Eect select
control
Level select
button
INPUT
LEVEL
EFFECT
MUTE
Eect select button
Level select button
EFFECT SELECTION
When playing stereo audio, you can use the eect select button
on the remote control or the control console to choose the type
ofsound you want to hear.
1. Stereo 3D – Provides a 3D surround sound eect through
allspeakers.
2. Stereo 4.1 – Plays stereo through both front and both rear
satellites, plus the subwoofer.
3. Stereo 2.1 – Plays stereo through both the front satellites
andthe subwoofer.
4. No eect – Plays audio format of your computers sound card
without applying any eects. Available for 6 channel input
only and is represented by having no eect LEDs illuminated.
Eect options for analog audio:
1. RCA and auxiliary inputs: select 3D, 4.1, and 2.1 for
yourlistening preference.
2. 6-channel input: select 3D, 4.1, 2.1, or no eect for
yourlistening preference.
You can enjoy DTS Digital Sound or Dolby Digital 5.1 streaming
by making sure that your audio source support these two audio
encoding technologies (please refer toSELECT AUDIO SOURCE).
Whenever you change the input, the last eect you selected
isautomatically restored.
For example, if you select Stereo 3D while listening through Input 2,
the next time you select Input 2 (i.e., the RCA stereoinput), Stereo
3D is automatically selected.
9 / 29 8 / 27 9 / 29

Other manuals for Logitech Z906

Related product manuals