Logitech Zone True Wireless User Manual

1. Place the earbuds in the charging case and close the lid
2. Plug the USB-C cable end into the USB-C port on the front of the charging case
3. Plug the USB-A end into the USB-A charging port on your computer or plug the USB-A end into the USB-C adapter and plug the USB-C adapter into the USB-C port on your computer
4. Case light Indicator will be a pulsing, white light for charging
5. Case light Indicator will be solid white when fully charged
— 2 hrs 45 mins for full earbuds charge
— 3 hrs for full case charge
— 5 mins will give you 2 hrs music time (ANC off)
6. Earbuds can be used with receiver and Bluetooth® paired while charging
Charging via Qi wireless charger
1. Place the charging case on top of any Qi wireless charging pad *
2. Case indicator light will be a pulsing, white light when charging
3. Case Indicator light will be solid white when fully charged
* Qi wireless charging base is not included
HOW TO SETUP YOUR DEVICE
1. Remove the earbuds from the charging case
2. Insert the earbuds into your ears
PAIR TO COMPUTER VIA USB RECEIVER
1. USB-A
Insert the USB-A receiver into the computer USB-A port
2. USB-C
Insert the USB-A receiver into the USB-C adapter Then insert the adapter into the computer USB-C port
3. Earbuds are pre-paired to the receiver included in the box Once successfully paired, the light indicator on the receiver will remain solid
PAIR TO SMARTPHONE VIA BLUETOOTH®

Logitech Zone True Wireless Specifications

General

Brand	Logitech
Model	Zone True Wireless
Category	Headphone
Language	English