Logitech Zone Wired - In-Line Controller Overview

USB-A
USB-C
WHAT’S IN THE BOX
1. Headset with In-line controller and USB-C connector
2. USB-A adapter
3. Travel bag
4. User documentation
CONNECTING THE HEADSET
Connect via USB-C
1. Plug the USB-C connector into your computer
USB-C port.
Connect via USB-A
1. Plug the USB-C connector into the USB-A adapter.
2. Plug the USB-A connector into your computer
USB-A port.
HEADSET FIT
Adjust headset by sliding headband open or closed
onboth sides.
ADJUSTING THE MICROPHONE BOOM
1. Microphone boom rotates 270 degrees. Wear it on
either left or right side. To activate audio channel
switching, download Logi Tune Desktop at:
www.logitech.com/support/zonewireddownloads.
2. Adjust exible microphone boom location to capture
voice better.
ADJUSTABLE SHIRT CLIP
Secure the cable to your clothing with the shirt clip or
remove it if you prefer.
1 2
4 English