Logosol B1001 G2 - Order of Adjustments

31
B1001
1
4
2
5
3
6
7
Read all the adjustment instructions before
beginning adjusting, and then follow the
step-by-step instructions while adjusting.
To ensure good operation of the sawmill, it is important that it is correctly
adjusted. Some adjustments affect other machine settings. Due to this, it
is crucial that you follow the order outlined below.
Adjust the levelness of the rail frame
Adjust the parallelity between the band blade and the cross bunks
Adjust the adjustable blade guide horizontally
Adjust the band wheels
Adjust the parallelity between the band blade and the rails
Tensioning the throttle wire
The lengthwise position of the blade / Adjust the lengthwise position of the blade
ORDER OF ADJUSTMENTS
IMPORTANT!