Instructions for use Lojer Modux nursing bed / Version 2.5
Copyright © Lojer Oy, 2022 30
Image 40. The mattress retention guide in the correct position
The height and width of the mattress must be as per manufacturer’s
instructions.
Make sure the mattress is set between mattress retention -guides (4
pcs). Check placement of the mattress regularly.
The side rails of the bed must be free to be lifted and lowered without
any external objects (mattress, hoses, bedding etc.) supporting or
wedging the side rail, so that the side rail cannot be held in the raised
position without its own locking mechanism being engaged.
When specialty mattress or mattress overlay is used, risk of
suffocation between side rail and mattresses edge increases and risk of
falling over side rail increases. Make sure specialty mattress or mattress
overlay don`t move side- or length wise on mattress support platform.
It is recommended to use mattress designed to prevent pressure
ulcers.
To Next Page
Loading...
