Lojer Modux - Page 42

Instructions for use Lojer Modux nursing bed / Version 2.5
Copyright © Lojer Oy, 2022 39
 hand-held controller and optional nurse control panel accessory
 accessories
9.4 Maintenance and inspection
Check the locking rings and circlips of the pegs, tightness of the screws,
attachment and tolerances of components in mechanisms in the following
locations:
 motor fastenings
 component bolt attachments, wheels, headboards, etc.
 sleeping surface mechanism joints
 lifting mechanism joints
 side rails
 accessories
 greasing, following items:
(Use e.g. Würth HSS 2000 synthetic spray Vaseline or normal general
Vaseline. Used lubricate should be tacky and pressure proof. Using spray
Vaseline is easier, because it can be sprayed to surfaces without dismantling
parts).
- Sliding tubes in lift mechanics, lift the bed to highest position – conduct
greasing and lower the bed down. NB! Grease all the surfaces of the
sliding tubes. Repeat if necessary.
Image 45. Greasing items on lift mechanics