13 440
Clamps
reversed
connected
Connect the car battery correctly
14 450
Short circuit
when started
Restart the device
15 470
Voltage
difference
protection
before starting
Return to factory for repair
16 480
Continuous start
protection
Wait 30 seconds to start again
Please read the
User Manual
carefully before using the LOKITHOR J402
multi-function startup power supply:
1. Please operate in strict accordance with the instructions, improper
operation may lead to serious safety accidents.
2. The starting power supply is only used to start the 12V engine, and
cannot start vehicles that exceed the specified displacement or exceed
the specified voltage (12V).
Safety Instructions
3. Forced start mode, in this mode, part of the safety protection
mechanism is invalid. Please use with caution, be sure to prevent short
circuit to connect wrong with positive and negative poles, otherwise it may
cause accident. Please check the operating instructions carefully before
operation.
4. In order to prolong the service life of the internal battery, please charge
the device in time when you get it, and charge and discharge the device
every three months to ensure that the starting power is in good condition
for the next use.
5. Do not use the product that has been excessive shocked, dropped or
other forms of damage
6. Do not disassemble the product. Please contact professional
maintenance personnel to repair and handle the abnormal product.
7. Do not use the product to start the vehicle while the product is in
charging.
8. Be careful during operation to avoid metal tools falling on product
interface (it may cause short circuit, equipment damage and explosion).
9. When using the product, ensure that the surrounding area of the
starting power supply is well ventilated.
To Next Page
Loading...
