LONCIN 1P65FA User Manual (English)

Questions and Answers:

P
ploweAug 9, 2025
What to do if my LONCIN 1P65FA Engine will not start?
- D
  ddeckerAug 9, 2025
  If your LONCIN Engine won't start, first, ensure the choke is closed unless the engine is warm, in that case it should be open. Next, check that the engine switch is turned to the 'ON' position. Make sure you have enough fuel. If the fuel is old or bad, drain the fuel tank and carburetor, then refuel with fresh gasoline. Inspect the spark plugs; gap or replace them if they are faulty, fouled, or improperly gapped. If the spark plugs are wet with fuel, dry and reinstall them, then start the engine with the control lever in the FAST position. Finally, if the fuel filter is clogged, or there's a carburetor, ignition, or valve malfunction, replace or repair the faulty components as needed.
C
Christopher WaltersAug 19, 2025
Why does my LONCIN 1P65FA Engine lack power?
- T
  taylordebbieAug 19, 2025
  If your LONCIN Engine lacks power, start by checking the filter element(s) and clean or replace them if clogged. Ensure you have enough fuel by refueling if necessary. If the fuel is bad, drain the fuel tank and carburetor, then refuel with fresh gasoline. Should the issue persist, inspect the fuel filter for clogs, and check for any carburetor, ignition, or valve malfunctions, replacing or repairing faulty components as required.
V
Vincent BennettAug 29, 2025
What to do if my LONCIN Engine operates erratically?
- B
  Benjamin GravesAug 29, 2025
  If your LONCIN Engine operates erratically, the spark plug may be defective. Install a new, correctly gapped plug. Also, ensure that the spark plug gap is set between 0.7 to 0.8 mm. A dirty air cleaner element can also cause this issue, so clean the air cleaner element.

LONCIN 1P65FA Specifications

General

Engine Type	Single cylinder, 4-stroke, air-cooled
Fuel System	Carburetor
Starting System	Recoil start
Oil Capacity	0.6 L
Weight	15 kg
Lubrication System	Splash lubrication