LONCIN 1P65FE - User Manual

Questions and Answers

V
Victor PerezAug 9, 2025
What to do if my LONCIN Engine will not start?
- D
  davidcraigAug 9, 2025
  If your LONCIN Engine won't start, first, ensure the choke is closed unless the engine is warm, in that case it should be open. Next, check that the engine switch is turned to the 'ON' position. Make sure you have enough fuel. If the fuel is old or bad, drain the fuel tank and carburetor, then refuel with fresh gasoline. Inspect the spark plugs; gap or replace them if they are faulty, fouled, or improperly gapped. If the spark plugs are wet with fuel, dry and reinstall them, then start the engine with the control lever in the FAST position. Finally, if the fuel filter is clogged, or there's a carburetor, ignition, or valve malfunction, replace or repair the faulty components as needed.
N
nleeAug 20, 2025
Why does my LONCIN 1P65FE lack power?
- I
  Ian AllenAug 20, 2025
  If your LONCIN Engine lacks power, start by checking the filter element(s) and clean or replace them if clogged. Ensure you have enough fuel by refueling if necessary. If the fuel is bad, drain the fuel tank and carburetor, then refuel with fresh gasoline. Should the issue persist, inspect the fuel filter for clogs, and check for any carburetor, ignition, or valve malfunctions, replacing or repairing faulty components as required.
C
Christopher JenkinsAug 30, 2025
What to do if my LONCIN Engine operates erratically?
- B
  brianpetersonAug 30, 2025
  If your LONCIN Engine operates erratically, the spark plug may be defective. Install a new, correctly gapped plug. Also, ensure that the spark plug gap is set between 0.7 to 0.8 mm. A dirty air cleaner element can also cause this issue, so clean the air cleaner element.