.16.
6. Use the clutch of reverse gear
Warning! Before using the clutch of reverse gear, lower the engine speed.
● By “engage ” and “disengage ”of the clutch of reverse gear, the user can control output of engine’s
power.
● When the user holds tight the clutch lever, the clutch is engaged and transmits engine power to the
tiller and tilling blades begin to reverse rotate. (See Fig.14)
Figure 14 Figure 15
● When the user releases clutch lever, clutch will be disengaged, and the engine power can’t be
transmitted to the tiller, and tilling blades stop rotating. (See Fig 15)
Note: When using the clutch of reverse gear , especial pay attention to safety . Sure , improper
To Next Page
Loading...
