.34.
Chapter VIII Trouble shooting
If the engine can’t be started, please check
1. Whether the engine switch is in the ON position,
2. Whether there is enough lubricant in the machine,
3. Whether fuel valve is in the ON position,
4. Whether there is fuel in the fuel tank,
5. Whether fuel can be delivered into carburetor, to check this, the user can loosen drain bolt of
carburetor and set the fuel valve to the ON position.
Warning! : If any fuel is spilled out, thoroughly remove it and let it dry up before checking spark plug or
starting the engine, because fuel spilled out and its vapor may cause a fire.
Drain bolt
To Next Page
Loading...
