LONCIN 600 - Page 35

.32.
iii. Table of mini-tiller’s technical maintenance (an item marked with √ shall be maintained)
Work interval
Content of
maintenance
Every
day
After 8 hours
of work
under a half
load
After the
first month
or after 20
hours
After the third
month or after
150 hours
Every
year or
1,000
hours
Every 2
years or
2,000 hours
Check and tighten bolts
and nuts
√
Check and add new
engine oil
√
Clean and change engine
oil
(First time) (Second
time)
√(third time
and thereafter)
Check if there’s oil
leakage
√
Clean dirt, weeds, and oil
stains
√
Solve problems
√
Adjust operating parts √
Tension belt
√
Gears and bearings √