PRE-OPERATION INSPECTION
Always check the following points before using this ATV:
INSPECTION PROCEDURE
●
Check the operation, condition and free play.
●
Adjust if necessary.
●
Check the fuel Level.
●
Fill fuel if necessary.
●
Check engine oil level.
●
Fill the engine oil if necessary
●
Check chain slack and lubricate.
●
Check for proper operation of throttle cable.
●
Check the level of fluid.
●
Fill distilled water if necessary.
●
Check all switches
●
Check all fittings and Fasteners.
●
Check tire pressure, wear and damage.
INSPECTION ITEM
Brakes
Fuel
Engine oil
Drive Chain
Throttle
Battery
Switches
Fittings and Fasteners
Wheels and Tires
27
To Next Page
Loading...
