CONTROLS
- 5 -
3. CONTROLS
1) Engine Switch
The engine switch enables and disables the ignition system.
The engine switch must be in the ON position for the engine to run.
Turning the engine switch to the OFF position stops the engine.
2) Choke Lever
The choke lever opens and closes the choke valve in the carburetor.
Set lever “CLOSE” for starting a cold engine.
After starting, set the choke lever to “OPEN” position
3) Recoil Starter Grip
Pulling the starter grip operates the recoil starter to crank the engine.
Don’t let the lever suddenly rebound, lightly put the lever back.
Choke lever
Open
Close
CAUTION
ON OFF
The engine switch
To Next Page
Loading...
