Lining
Enter liner thickness.
Select the Liner Material.
The following options are available:
0. No liner
1. Tar Epoxy
2. Rubber
3. Mortar
4. PP Polypropylene
5. Polystryol
6. PS Polystyrene
7. Polyester
8. PE Polyethylene
9. Ebonite
10. Teflon
11. Other
Item 11 "Other" is available to enter other
materials that are not included in previous
ten items. Once the "Other" is selected, the
relevant liner sound velocity must be
entered.
M12
Medium
Select the temperature of water.
Temperature should be 0-80 deg. C.
Press “Enter” to confirm.
Note: Room temperature is 25 deg.C
M13
To Next Page
Loading...