APP
FEATURES
Page 9 V 2.0
BLINKER SHOT LOCATOR
With the Blinker Shot Locator feature, it's quick and easy to find your
your newest bullet hole. Simply touch the shot locator icon and your
most recent bullet hole will start blinking, making it a breeze to find.
For the feature to work correctly, you must tap the shot locator button
after each shot you take. This is because the feature takes a snapshot of
your target each time you tap the button and then alternates between
the last two images of your target to blink your last shot. If you don't tap
the button after each shot then you will likely begin to see multiple
holes flashing, because the software is just comparing the most recent
snapshot to a snapshot of the target the last time you pushed the
button.
SHOT MARKING
Shot Marking is one of the core features of the TARGETVISION app. It
allows you to keep track of your shots by simply tapping on them as
they appear. As you tap, the app will place a semi-transparent marker
over the image and will auto number the markers as well. You can
adjust the marker size and color via the options menu as well as mark
groups of shots different colors. Shot markers cannot be moved once
they have been placed but you can undo shot markers with the undo
button or remove all markers currently on the screen with the "Reset
Overlays" button in the options menu (currently only available on iOS).
MARKER SIZE
The Marker size option allows you to roughly match the size of the shot
marker to the size of your bullet hole. Once you select a marker size,
that selection is saved as the default marker size until you change it
again.
To Next Page
Loading...