APP
FEATURES
Page 12 V 2.0
ZERO MODE
Zero Mode helps you to zero your optic by calculating the correction
needed to move your point of impact to your point of aim. For this
feature to work correctly, you must provide the app with a reference
distance (just like in Live Group mode), your point of aim, caliber, and
distance to the target. After the initial setup, as you mark your impacts,
the app can tell you what correction to make in MOA, Mils, or inches,
depending on which Display option you have selected in the main
menu.
*This feature is currently only available on Android
LIVE GROUP
The Live Group feature actively calculates your group size with each
new shot marker that you place. For the feature to work correctly, you
must know the distance between two set points on your target and
input that information into the app when you turn live group mode on.
It isrecommended that you use two corners of your target as reference
points for this measurement and input. After inputting a reference
distance, the app will begin to calculate the distance between your two
furthest shots from each group.
ADDITIONAL RESOURCES
Additionaldetails on features along with detailed screenshots and
videos can be found under the support tab on our website,
www.longshotcameras.com.
To Next Page
Loading...