APP FEATURES
GROUP SIZING
The Group Sizing feature actively calculates your group size with
each new shot marker that you place. For the feature to work
correctly, you must know the distance between two set points on
your target and input that information into the app when you turn
Group Sizing mode on. It isrecommended that you use two
corners of your target as reference points for this measurement
and input. After inputting a reference distance, the app will begin to
calculate the distance between your two furthest shots from each
group.
ZERO ADJUSTMENT
Zero Adjustment is a feature within Group Sizing. It helps you to
zero your optic quickly by calculating the correction needed to
move your point of impact to your point of aim. After initiating
Group Sizing, you can toggle the zero adjustments on and off from
the top navigation bar. When on, the app calculates the center of
your group and then calculates the vertical and horizontal
corrections needed to move the center of your group to your point
of aim.
ADDITIONAL RESOURCES
Additionaldetails on features along with detailed screenshots and
videos can be found in the app under or under the support tab on
our website, www.longshotcameras.com.
Page 14
To Next Page
Loading...
