Need help?Do you have a question about the Lonza pulsar system 140 and is the answer not in the manual?
Explains the basic operational flow and components of the Pulsar® 140 Chlorinator.
Details the necessary inlet pressure, vacuum, temperature, and power supply.
Lists inlet and outlet flow rates for the Pulsar® 140 Chlorinator.
Covers physical size, chemical capacity, and recommended pool volumes.
Defines the output range of available chlorine per day.
Identifies and describes the main components of the Pulsar® 140.
Explains the function of the lid safety switch in interrupting flow.
Details the overflow switch's role in preventing unit overflow.
Describes the control panel, timer, and solenoid for output rate.
Outlines procedures to test the unit's electronic switches.
Details the overflow port's function and its connection to a drain.
Highlights features for maintaining the Pulsar® 140, including agitator and drain.
Guides on checking inlet water flow for proper system operation.
Guides on ensuring proper outlet water flow for system operation.
Provides recommended feed rates based on pool volume for initial setup.
Covers initial power-up, basic screen navigation, and system setup.
Details feeder size, ORP/feed selection, booster pump mode, and feed rate adjustments.
Explains how to access and interpret alarms on the control panel.
Provides step-by-step instructions for cleaning the chlorinator with acid cleaner.
Lists the detailed steps required for the cleaning procedure.
Illustrates the components of the wash manifold assembly.
Shows the assembly of the spray manifold.
Displays the parts included in the discharge assembly kit.
Illustrates the components of the inlet manifold assembly.
Shows the assembly of the valve plate.
Details the components of the Pulsar® installation kit.
Depicts the main screen layout and key elements of the PLC interface.
Outlines the warranty terms for the chlorinator equipment.
Specifies the warranty period for replacement parts.
General| Brand | Lonza |
|---|---|
| Model | Pulsar System 140 |
| TOC | < 5 ppb |
| Bacteria | < 1 CFU/mL |
| Endotoxins | < 0.001 EU/mL |
| Manufacturer | Lonza |
| Water Quality | Ultrapure |
| Flow Rate | 140 L/h |
| Resistivity | 18.2 MΩ·cm |
| Dimensions | Varies depending on configuration; consult manufacturer |
| Weight | Varies depending on configuration; consult manufacturer |
| Power Supply | Varies depending on configuration; consult manufacturer |
| Type | Water Purification System |
To Next Page