What to do if E-4 appears on the LED display of my Look Solutions Fog Machine?
If your Look Solutions Fog Machine displays 'E-4', it indicates the machine is overheating. To resolve this, disconnect it from the main power supply briefly, and then reconnect it.
How to troubleshoot a Look Solutions Fog Machine that does not fog?
If your Look Solutions Fog Machine is not fogging, several factors could be at play. Here's what to check: * External control signals * Mains supply * Fluid tank level (is it empty?) * Correct connections at the fluid bottle * Fluid presence in the fluid tube * If the fluid filter is clogged * Pump setting (ensure it's >1)
Why does my Look Solutions Fog Machine switch off suddenly?
If your Look Solutions Fog Machine suddenly switches off, it's likely due to the temperature cutout being activated due to overheating. Ensure there isn't an external heat source, such as a projector, directed at the housing, and that the machine has sufficient fresh air. The unit should automatically switch back on after 15 to 30 minutes.
General| Brand | Look Solutions |
|---|---|
| Model | Viper 2.6 |
| Category | Fog Machine |
| Language | English |
Details on compatible fog fluids and warranty implications of using non-approved liquids.
Step-by-step instructions for replacing the fluid container with a new one.
Criteria for choosing a suitable operating environment for the fog generator.
Procedure for connecting the machine to power and preparing it for use.
Instructions on how to safely turn off the Viper 2.6 fog generator.
Explanation of the control panel layout and its various functions and displays.
Details on various ways to control the fog machine, including DMX, analog, and standalone modes.
Instructions for using the built-in timer to control fog output and wait times.
Technical specifications for connecting DMX and analog control signals.
To Next Page
