LORD W9 - Machine Levelling; Water and Drain Hose Connection

11
Levelling the washing machine
Warning!
• Thelocknutsonallfourfeetmustbescrewedtightlyagainstthehousing.
1. Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2. Loosen the lock nut turn the feet until it closely contacts with the oor.
3. Adjust the legs and lock them with a spanner, make sure the machine is steady.
2
3
4
1
Raise
Lower
Lock
nut
foot
Connect Water Supply Hose
Warning!
• Topreventleakageorwaterdamage,followtheinstructionsinthischapter
• Donotkink,crush,modifyorseverwaterinlethose
• Forthemodelequipshotvalve,connectittohotwatertapwithhotwatersupply
hose. Energy consumption will decrease automatically for some program.
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1. Connection between ordinary tap and inlet hose.
2
3
41
clamp nut
slide bushing
Loosen clamp nut
and
four bolts
Tighten clamp nut Press slide bushing,
insert inlet hose
into connecting
base
Connection nished
2. Connection between screw tap and inlet hose.
Tap with threads and inlet hose
Special tap for washing machine