BERNT LORENTZ GmbH & Co. KG
Siebenstücken 24, 24558 Henstedt-Ulzburg, Germany,
Tel (+49) 0 4193 8806-700, Fax -708, www.lorentz.de
Guide for replacing the Current Board (v2 and v3) in a PSk2 series pump
controller (PS7k-2, PS9k-2, PS15k-2)
All specifications and information are given with good intent, errors are possible and products may be subject to change without notice.
Pictures may differ from actual products depending on local market requirements and regulations.
c) Please refer to the following
document:
“Guide for replacing the LEDcontrol
board in a PSk2 series pump
Controller”
(implement until step 4.1 d))
d) Use the 8 mm wrench to unscrew the
2 (two) fixation nuts.
To Next Page
Loading...