Find your Device ID
Record your information below:
DEVICE ID:
Quick
Reference
Default access information:
• Default user name: admin
• Default password: 000000
Default system ports:
• HTTP Port: 80
• Client Port: 35000
Information in this document is subject to change without notice. As our products are subject
to continuous improvement, Lorex Corporation and our subsidiaries reserve the right to
modify product design, specifications and prices, without notice and without incurring any
obligation. E&OE © 2014 LOREX. All rights reserved.
lorex.ca/LHV1000
It’s all on the Web
Need Help?
Visit www.lorextechnology.com/support
LHV1000_QNG_EN_R1
If you have forgotten your
password, contact
Lorex technical support.
2
b
Download the Client Software for PC from
lorex.ca/LHV1000.
a
Once installation is finished, double-click the FLIR
Cloud Client™ icon ( ) on the desktop.
d
1
2
3
4
5
1
2
3
4
5
Enter the following information:
3
Connecting on PC
Quick PC Guide
Congratulations! You can now connect over the Internet to view
and playback video on your PC.
15 Minutes
The Device ID is printed on a label on the top panel of the DVR.
See the label on top of
your DVR for your
Device ID.
NOTE: For Mac
software downloads and
instructions, please visit
lorex.ca/LHV1000.
Scan the QR code or visit the address below to access
the latest software and instruction manuals.
Device ID: xxxxxxxxxxx
c
Log into the Client Software using the Client Software
user name (default: admin) and password (default:
admin) and then click Login.
User Name: admin
Password: admin
Click Add Device
c
Device Name: Choose a name for your system of your choice.
Device ID: Manually enter the Device ID printed on the label.
Client Port: Enter the Client Port (default: 35000).
User Name: Enter the DVR’s User Name
(default: admin).
Password: Enter the DVR’s Password
(default: 000000).
e
You will be prompted to change the DVR
password. Click OK.
f
Enter a new 6 character password and tap
OK. This password will be used to connect to
your system from now on.
Click Add
g
Click then .
h
Click and drag Default Group to the display
window to open your cameras in live view.
To Previous Page
Loading...
Need help?
General