Lorex LNR6100X Series User Manual

Information in this document is subject to change without notice. As our products are subject
to continuous improvement, Lorex Corporation and our subsidiaries reserve the right to modify
product design, specifications and prices, without notice and without incurring any obligation.
E&OE © 2018 Lorex Corporation. All rights reserved.
Package Contents:
Connecting Your System
4K Network Video Surveillance Recorder
LNR6100X Series
Quick Connection Guide
2
IP Cameras*
Monitor*
Router* Mouse
Ethernet Extension Cable*
NOTE: It may take up to 1
minute for cameras to start
up and transmit video to
your NVR.
Power
1
LNR6100X_QCG_EN_R1
3 4 5
Beeping
If the system is beeping after startup, the
Ethernet cable may not be connected or the
system may not be connected to the network.
To stop the beeping:
1. Connect an Ethernet cable from the system
to your router.
OR
2. Right click and click Disable Beep.
Firmware Update
This system features automatic firmware
upgrades for enhanced functionality. It is
required to upgrade your system to the latest
firmware version.
If a firmware upgrade is available:
1. After startup, a notification will appear
asking you to upgrade the firmware. Click OK
to upgrade.
2. The system will download and install the
firmware upgrade. Wait for the firmware
update to complete. The system may restart
during the firmware upgrade process.
DO NOT power off or disconnect the power
cable during firmware installation.
* Not included / sold separately.
8-channel configuration shown. 4 channel will have the respective number of video inputs. For camera
compatibility information, visit lorex.com/compatibility.
The NVR is set to 1080p
output by default. To optimize
picture quality, set the NVR’s
video output to match the
resolution of your monitor.
!
4K NVR
Quick Start Guides
USB Mouse
Power Adapter
Remote Control
Ethernet Cable HDMI Cable
Need Help?
Visit us online for up-to-date software and
complete instruction manuals
Click on the Downloads tab
4
Visit lorex.com
Search for the model number
of your product
Click on your product in the
search results
3
2
1
Recommended:
Connect cameras
to the NVR.
OR
Connect cameras to a PoE switch* or router*
on your network. See “Adding Cameras from
the LAN” on reverse for more details.
OR
HDMI
Supports
up to 1080p
Supports
up to 4K
VGA*
For PoE switch
installations only

Lorex LNR6100X Series Specifications

General

Brand	Lorex
Model	LNR6100X Series
Category	Network Hardware
Language	English

Summary

Connecting Your System

Connecting IP Cameras

Details on connecting IP cameras, including notes on startup time and optional Ethernet extension cables.

Router and Monitor Connection

Instructions for connecting the NVR to a router and monitor, with notes on video output optimization.

Mouse and Power Connection

Guidance on connecting the USB mouse and power adapter to the NVR system.

System Beeping Alert Resolution

Troubleshooting steps for system beeping, related to Ethernet connection or network issues.

Firmware Update Process

Information on automatic firmware upgrades, how to initiate them, and important precautions.

Creating a New Password

Using the Mouse

Mouse Click and Scroll Actions

Details on left-click, right-click, and scroll wheel functions for navigation and interaction.

Mouse Navigation Bar

How to use the mouse cursor to open and close the navigation bar during live view.

Adding Cameras from the LAN

Configuring Deterrence Settings

Automatic Deterrence Setup

Steps to configure automatic warning light deterrence for compatible cameras via NVR settings.

Deterrence Active Area and Sensitivity

Setting the active area, sensitivity, and threshold for automatic deterrence triggers.

Deterrence Schedule and Duration

Configuring the schedule and duration for automatic deterrence activation.

Manual Deterrence Activation

Instructions on how to manually activate warning lights and sirens for deterrence cameras.

Playback and Search

Playback and Search Procedure

Steps to access playback, select dates and channels, and choose video quality for recordings.

Setting the Date and Time

Date and Time Configuration

Guide to setting the system's date, time, time zone, and enabling Daylight Saving Time.