This document is an instruction manual for a Lorus Analogue Quartz watch, specifically for models with Calibre PC32 and PC33. It provides comprehensive guidance on setting the time, day, and date, as well as information on the watch's features, maintenance, and water resistance.
Function Description:
The Lorus watch is an analogue quartz timepiece designed to display time, and for certain models, the day and date. It operates using a quartz movement, ensuring accurate timekeeping. The manual details how to set these functions using the crown. For day/date models, the day of the week can be displayed bilingually (English/another language), offering user flexibility. The watch is designed for everyday wear, with specific instructions for various levels of water resistance.
Important Technical Specifications:
The manual refers to specific calibres: PC32 and PC33. While detailed technical specifications like movement type (e.g., number of jewels, frequency) or battery type are not explicitly listed, the document mentions "battery change" and advises replacing the battery when it runs down to prevent malfunction.
Water Resistance:
The watch's water resistance is categorized based on indications on the dial/case back:
- No indication: Not water resistant. Not suitable for any water contact.
- "WATER RESISTANT" indication: Resistant to accidental water contact such as splashes and rain. Not suitable for swimming, skin diving, or scuba diving.
- "WATER RESISTANT" (50M/5 BAR) indication:* Suitable for accidental water contact and swimming. Not suitable for skin diving or scuba diving.
- "WATER RESISTANT" (100M/10 BAR) indication:* Suitable for accidental water contact, swimming, and skin diving. Not suitable for scuba diving.
- "WATER RESISTANT" (200M/20 BAR) indication:* Suitable for accidental water contact, swimming, skin diving, and scuba diving.
For watches exposed to salt water, it is crucial to rinse them in fresh water and wipe them thoroughly dry. It is also advised not to press buttons or turn the crown when the watch is wet, regardless of its water resistance rating.
LUMIBRITE Watch Features:
For Lorus LUMIBRITE watches, the manual highlights their ability to absorb and store light energy from natural and artificial sources, then emit light in the dark. These watches are made of environmentally friendly materials, harmless to humans and the environment.
- Luminous Duration: With a full charge, LUMIBRITE watches glow in the dark for hours longer than conventional luminous watches. Exposure to light of more than 500 lux (typical office brightness) for approximately 10 minutes, or direct sunlight for 2 minutes, will provide hours of glow.
- Brightness Degradation: The brightness of the emitted light will gradually decrease over time. The duration and brightness may also vary depending on factors such as the brightness of and distance from the light source used to charge the watch.
Usage Features:
- Non-Calendar Model Time Setting: Pull the crown out to the first click, set the time, then push the crown in. When setting, advance the minute hand slightly past the desired time, then turn it counterclockwise to the correct time.
- Day/Date Model Setting (Calibre PC32/PC33):
- Setting Day and Date: Pull the crown out to the first click. Turn the crown to set the previous day and date. The day and date can be selected bilingually. For Cal. PC33, turn clockwise to set the date only.
- Setting Time: Pull the crown out to the second click. The second hand will stop, ideally at the 12 o'clock position. Turn the crown to set the desired time. Push the crown in to the normal position in accordance with a time signal.
- AM/PM Check: Ensure AM/PM is correctly set, as the day and date change once every 24 hours.
- Minute Hand Adjustment: To adjust the correct time for a quartz watch, advance the minute hand 4 or 5 minutes ahead of the correct time, then turn it counterclockwise to the designated time.
- Day Setting for Cal. PC33 (Advanced): At the second click position, turn the hands clockwise and counterclockwise repeatedly between 11:15 pm and 3:45 am to select the desired day and language.
- Caution for Day/Date Setting: Do not attempt to set the day and date between 9:00 pm and 4:00 am, as this may cause the display to change out of sequence.
- Band Length Adjustment (Sliding Clasp Band):
- Pry up the adjusting flap with a small screwdriver or a sharpened tip.
- Slide the clasp to adjust it to the desired size.
- Ensure the grooves on the back side of the bracelet fit into the convex portion on the clasp, then close the adjusting flap.
- Warning: Improper adjustment can destroy the adjusting flap.
Maintenance Features:
- Battery Change: The battery is inserted at the factory for testing, so its actual life may be shorter than specified. Replace the battery as soon as it runs down to prevent malfunction. It is recommended to take the watch to a local watch retailer for battery replacement.
- Battery Caution: Do not expose old batteries to fire or recharge them. Keep them out of reach of children. Seek immediate medical attention if a child swallows a battery.
- Allergic Reaction: The case and band touch the skin directly, so regular cleaning is important. Neglecting this can stain shirt sleeves or cause rashes for those with delicate skin. Wear the watch with some play to avoid allergic reactions. If a rash develops, stop wearing the watch and consult a physician.
- Magnetism: Strong magnetism can adversely affect the watch. Keep it away from magnetic objects.
- Shocks and Vibrations: The watch can be worn for normal sports activities, but avoid dropping it or hitting it on hard surfaces.
- Temperature: The watch is preadjusted for constant accuracy at normal temperatures.
- Service: For repair or servicing, refer to the enclosed WARRANTY/GUARANTEE.
The manual includes a prominent warning about button batteries:
- Hazard: If swallowed or placed inside any part of the body, the battery can cause severe or fatal injuries within 2 hours or less.
- Safety: Button batteries are hazardous whether new or used. Keep them out of reach of children.
- Emergency: If a battery is suspected to be swallowed or placed inside the body, seek immediate medical attention. Contact the Australian Poisons Information Centre immediately on 13 11 26 (New Zealand 0800 764 766) for 24/7 fast, expert advice.
To Next Page
Need help?
General
