Dashboard Switches
Lighting functions are controlled by two push button switches
mounted in the dashboard outboard of the steering column. Each
switch is pressed once to switch on, and pressed a second time
to switch off. A symbol is positioned alongside each switch to
indicate its function, and is backlit orange when the lights are
switched on.
Parking Lamps Switch
The upper switch functions with or without the ignition, and
switches on the front and rear parking lamps, side marker lamps
and instrument/switch illumination. A tell tale in the switch button
lights up green to indicate when the circuit is active.
Note that the headlamps must be off before the parking lamps
can be switched off.
Headlamp Switch
The lower switch functions with or without ignition, and
switches on the headlamps together with the parking lamps, side
marker lamps and instrument/switch illumination. A tell tale in
the switch button lights up green to indicate when the circuit is
active. The steering column lever switch (see later) is used to
select high or low beam.
Pressing the switch a second time will switch off the head
-
lamps, but leave on the parking lamps.
Instruments & Switches
To Next Page
Loading...
