EasyManuals Logo

Lotus CP-94G Operation & Maintenance Instructions

Lotus CP-94G
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
USA
NB: it is recommended to carry out this operation using water which is not too hot.
INSTRUCTIONS FOR DISCHARGING GAS EMISSIONS
Type “A” Appliances
Type “A” appliances must discharge the products of combustion into extractor hoods or similar devices connected to
and efficient chimney, or directly outside. (Natural Discharge) Fig.1.
If there is no hood, as an alternative, an air extractor connected directly to the outside is acceptable, (Forced
Discharge) Fig.2, but its capacity must not be inferior to what is established.
In the event of forced discharge
The gas supply to the appliance, must be directly interlocked to the system and must cut off automatically if its capacity
drops below the values prescribed.
Supplying the appliance with gas again must only be possible manually
NATURAL DISCHARGE Fig.1 FORCED DISCHARGE Fig.2
1) Extractor hood 1) Extractor hood
2) Interlocking
CLEANING AND MAINTENANCE
Attention! During cleaning, do not wash the external parts of the appliance with direct sprays of water or with
high pressure.
After every use, clean the appliance thoroughly. Daily cleaning after switching off the appliance ensures the perfect
functioning and long life of the appliance.
Before starting to clean the appliance, disconnect the power supply. The parts in steel must be washed with hot water
and neutral detergent, then rinsed thoroughly in order to eliminate all traces of detergent; after which, dried with a dry
cloth. Do not use abrasive or corrosive detergents.
The enamelled parts should be washed with soapy water.
Oven: Cleaning the oven is made easier by removing the support grill.
Important: As well as ordinary cleaning and maintenance, it is advisable to have the installation checked by an
installer at least once a year.
It is therefore suggested to draw up an after-sales assistance contract.
WHAT TO DO IN THE EVENT OF A BREAKDOWN
Turn off the gas tap and notify the after sales service.
PROCEDURE TO FOLLOW IF THE APPLIANCE IS NOT GOING TO BE USED FOR
SOME TIME
Turn off the gas tap and clean the appliance as specified above.

Other manuals for Lotus CP-94G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lotus CP-94G and is the answer not in the manual?

Lotus CP-94G Specifications

General IconGeneral
BrandLotus
ModelCP-94G
CategoryCommercial Food Equipment
LanguageEnglish

Related product manuals