To Next PageTo Next PageWhat does Er-6 Error code mean on Louisiana Grills FOUNDERS LEGACY LG0800FL?
If your Louisiana Grills Grill displays an Er-6 error code, unplug the unit from the power source. Remove the hopper access panel and locate the red and white wires of the igniter. Disconnect the single molex connector, then reconnect it until it clicks. Replace the hopper access panel. If the error code persists, contact customer service.
What does Er-7 Error code mean on Louisiana Grills Grill?
If your Louisiana Grills Grill shows an Er-7 error code, unplug the unit from the power source. Remove the hopper access panel and find the yellow and white wires of the auger motor. Check the auger motor and bracket for damage. Disconnect the spade connectors, then reconnect them until they click. Replace the hopper access panel. If the error code remains, contact customer service.
General| Grill Category | Pellet Grill |
|---|---|
| Cooking Area | 800 sq in |
| Total Cooking Area | 800 sq in |
| Fuel Type | Wood Pellets |
| Warranty | 5 years |
| Temperature Range | 180°F to 600°F |
| Ignition | Automatic |
Outlines critical safety precautions, operating warnings, and emergency procedures for grill use, including clearance and fire safety.
Details the high-heat range (205-315°C / 401-600°F) for searing and direct flame cooking.
Explains the medium-heat range (135-180°C / 275-356°F) for baking, roasting, and slow smoking.
Step-by-step guide on how to adjust the desired cooking temperature using the control board.
Step-by-step guide for safely starting and igniting the wood pellet grill.
Solutions for problems related to the control board power light not flashing or behaving incorrectly.
Troubleshooting steps for the fire in the burn grate not lighting or failing to ignite properly.
Solutions for actual temperature readouts not adjusting or displaying incorrectly.
Advice for frequent flare-ups and issues causing excess or discolored smoke during grilling.
Steps to resolve problems with the grill not achieving or maintaining a stable temperature.
Diagnosing and fixing errors related to the grill probe's connection to the control board.
Troubleshooting steps for when the grill fails to perform its startup cycle correctly.
Solutions for issues where the grill will not stay lit, possibly due to overheating or fuel problems.
Details the terms, coverage periods, and limitations of the manufacturer's warranty.
Instructions on how to obtain warranty service, including required documentation.
