Copyright (c) 2017 Loupedeck Ltd. All rights reserved.
Navigating between layers, changing layer order, edit selection between layer or mask, layer
visibility, clipping mask and toggling between layer blending modes are located on the right side
of the console. These functions can be activated easily with a mouse when working with the
Loupedeck+ & mouse combination.
Some functions can be located within in the middle of Loupedeck+. These are multi-functions
that can be used in several different workflows, including layer management (such as delete and
invert).
1) Layer controlling when right hand is using a pen or a mouse
Layer grouping
and merging
Working with selected layers:
Press R1 to group selected layers. Press FN+R1 to
ungroup.
Press R2 to merge selected layers as a new layer, or press
FN+R2 to merge selected layer(s) down as one layer.
Working without selecting layers:
Press R3 to merge visible layers as a new layer, or press
FN+R3 to make a duplicate layer
Press R4 to assign layer as a clipping mask
Press FN+R4 to hide layer affect (Layer Visibility on/off).
Press R5 to create a new layer.
Press FN+R5 to create a new layer mask. *
* You can make a black mask by pressing FN+R5 (Create
Mask) & pressing C4 (Invert) to invert mask from white to
black.
Press C3 to delete a layer or a layer mask
Press C4 to invert layer or mask colors.
Press FN+C3 to Fill selected layer or a mask
2) Right hand layer controlling with Loupedeck+
To Next Page
