Loupedeck Loupedeck+ - Page 16

Copyright (c) 2017 Loupedeck Ltd. All rights reserved.
16
When the Exposure Adjustment Layer is active and
selected from the layer list:
Turn Exposure dial to increase / decrease Exposure
value.
Turn Blacks dial to increase / decrease Offset value.
Turn Contrast dial to increase / decrease Gamma
Correction value
Brightness/
Contrast
Contrast,
Exposure
Press Contrast dial to create a Brightness/Contrast
adjustment layer.
When the Contrast Adjustment Layer is active and
selected from the layer list:
Turn Exposure dial to increase / decrease Brightness
value.
Turn Contrast dial to increase / decrease Contrast
value.
Levels
Blacks,
Whites,
Contrast,
FN
Press Blacks dial to create Levels adjustment layer.
When Levels adjustment layer is active and selected
from the layer list:
Turn Blacks dial to set black point, turn Whites dial to
set white point and turn Contrast dial to set midpoint
value.
Keep FN pressed down and Turn Blacks dial to set black
point target and turn Whites dial to set white point
target. Release FN button after target points have been
set.
Color Lookup
Whites
Press Whites dial to create adjustment layer.
Use mouse to select and change parameters.
Curves
Highlights,
Clarity,
Shadows
Press Highlights dial to create an adjustment layer.