GB
5
tip
circular bottom
HOW TO ASSEMBLE THE BREAST PUMP
Hold the „horn” of the breastshield body in one hand.
Make sure the bottle-thread side opening is facing up.
With the thumb and fore-nger of the
other hand, hold the tip of the one-way
valve and place the at circular bottom
into the opening. Be sure not to stretch,
bend, or twist the tip of the one-way
valve. Seal all the edges rmly.
With your thumb and fore-nger, gently
seal any openings on the tip of the one-way
valve and shape into a straight line.
Note: The one-way valve tip does not have to align
with anything, as long as all the edges are securely
sealed. This is critical to the optimal performance
of the pump.
Carefully twist the bottle adapter to the breastshield body for a secure t.
Note: Be sure not to bump the one-way valve when twisting the breastshield
body & the bottle adapter pieces together. If you bump the one-way valve,
repeat above steps.
With the bottle adapter in one hand, twist the collection
bottle for a secure t.
With the cup in one hand, place the silicone
diaphragm in the cup (matching the shape
of the cup). Press around the edges of the
diaphragm for a secure t. Make sure the
diaphragm is evenly mounted on the cup
and there is no gap in between them.
GB
To Next Page
Loading...
