EasyManua.ls Logo

Lovibond PFXi 995 - User Manual

Lovibond PFXi 995
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Lovibond
®
PFXi Series Operator’s Instruction Manual V1.6
Page 1 of 53
Lovibond®
PFXi-Series
OPERATORS INSTRUCTION MANUAL
The Tintometer Limited, Solar Way, Solstice Park, Amesbury, Wilts, SP4 7SZ
Telephone: +44 1980 664800 Email: sales@tintometer.com

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Lovibond PFXi 995 and is the answer not in the manual?

Summary

Safety Warning and Plug Information

Introduction to the Manual

Caution and Safety Signs

Details the meaning of the caution and warning symbols used in the manual.

Instrument Installation Procedure

Instrument Keypad Layout

Hardware Setup and Configuration

Network Settings Configuration

Configures IP address, subnet mask, and gateway for network connectivity.

General Settings Configuration

Configures instrument behaviour like event logging, beeper, and display sleep time.

Measurement Options Setup

CIE Color Space Settings

Path Length Settings

Measurement Averaging

Switch Measurement Averaging On;Off

Enables or disables the averaging of multiple measurements for a result.

Setting Number of Measurements to Average

Defines the quantity of measurements to be included in the averaging process.

Selecting Averaging Method

Chooses between 'Manual' or 'Automatic' methods for measurement averaging.

Setting Time Interval for Automatic Averaging

Sets the time interval between measurements when automatic averaging is enabled.

Colour Scale Selection

Performing a Baseline Measurement

Taking a Measurement

Displaying Measurement Results

Spectral Information Display

Displays spectral data, wavelength, %T, ABS, and OD values of the measurement.

CIE Color Scales Display

Shows results in CIE LAB and CHROMATICITY xyY colour spaces.

Printing and Colour Difference Modes

Colour Difference Mode Operation

Explains how to use the instrument for comparing sample colour against a standard.

Converting Sample to Standard

Remote Calibration Procedure

Calibration Procedure Steps

Step-by-step guide to connect to the Tintometer server for remote calibration.

Appendix 1: Firmware Upgrade Procedure

PFXi Firmware Upgrade Steps

Step-by-step instructions for updating the instrument's firmware via USB.

Appendix 2: Instrument Registration

Summary

Safety Warning and Plug Information

Introduction to the Manual

Caution and Safety Signs

Details the meaning of the caution and warning symbols used in the manual.

Instrument Installation Procedure

Instrument Keypad Layout

Hardware Setup and Configuration

Network Settings Configuration

Configures IP address, subnet mask, and gateway for network connectivity.

General Settings Configuration

Configures instrument behaviour like event logging, beeper, and display sleep time.

Measurement Options Setup

CIE Color Space Settings

Path Length Settings

Measurement Averaging

Switch Measurement Averaging On;Off

Enables or disables the averaging of multiple measurements for a result.

Setting Number of Measurements to Average

Defines the quantity of measurements to be included in the averaging process.

Selecting Averaging Method

Chooses between 'Manual' or 'Automatic' methods for measurement averaging.

Setting Time Interval for Automatic Averaging

Sets the time interval between measurements when automatic averaging is enabled.

Colour Scale Selection

Performing a Baseline Measurement

Taking a Measurement

Displaying Measurement Results

Spectral Information Display

Displays spectral data, wavelength, %T, ABS, and OD values of the measurement.

CIE Color Scales Display

Shows results in CIE LAB and CHROMATICITY xyY colour spaces.

Printing and Colour Difference Modes

Colour Difference Mode Operation

Explains how to use the instrument for comparing sample colour against a standard.

Converting Sample to Standard

Remote Calibration Procedure

Calibration Procedure Steps

Step-by-step guide to connect to the Tintometer server for remote calibration.

Appendix 1: Firmware Upgrade Procedure

PFXi Firmware Upgrade Steps

Step-by-step instructions for updating the instrument's firmware via USB.

Appendix 2: Instrument Registration

Lovibond PFXi 995 Specifications

General IconGeneral
DetectorSilicon photodiode
Path Length10 mm
Light SourceLED
InterfacesUSB
DisplayColor LCD
Color ScalesEBC, ASBC, SRM, Lovibond, Hazen, ICUMSA, Gardner

Related product manuals