29
To reset seasonal fuel:
1. Press MENU, select SYSTEM SETUP and press ENTER.
2. Highlight
FUEL SETUP and press ENTER.
3. Select
RESET SEASONAL and press ENTER. The Select Engine menu will
appear with up to four options. (If you have one engine, the reset
seasonal fuel message (Step 4) will appear.)
4. Select the desired engine or All Engines and press
ENTER. The
following message will appear: Press Enter to reset Seasonal Fuel.
5. Press
ENTER to reset seasonal fuel. You will be taken back to the
main display.
Fuel Warning
The Fuel Warning feature allows you to set a Low level or High level
alarm for each fuel tank. A pop-up window will appear and an alarm
will sound if the amount of fuel rises above (High Level) or falls below
(Low level) the selected percentage of tank capacity.
To set a fuel warning:
1. Press MENU, highlight SYSTEM SETUP and press ENTER.
2. Select
BUS DEVICES and press ENTER. Highlight FUEL FLOW and press
ENTER. The Fuel Flow menu will appear. Select FUEL WARNING (Fuel
Wrng) and press
ENTER.
3. The Select Level menu will appear with two options: High Level and
Low Level.
4. Highlight
LOW LEVEL or HIGH LEVEL and press ENTER. The Set
Percentage window will appear. It will be set to Off by default.
5. Use the
UP and DOWN keys to input the desired percentage of tank
capacity that will trigger the alarm. If the amount of fuel falls below
the percentage you choose, the alarm will go off.
6. Press
ENTER and you will be taken back to the Bus Devices list.
Press
EXIT repeatedly to return to the main display.
NOTE:
To turn off a fuel warning, repeat Steps 1-3, then select
OFF from
the Level Percentage window mentioned in Step 4. Press
ENTER.
Repeat these steps for each warning you want to turn off. Press
EXIT repeatedly to return to the main display.
Engine Warnings (Alarms)
The Engine Warnings feature allows you to set an alarm for one or
more engines, which will alert you to several engine issues including
overheating and low oil pressure.
To Next Page
Loading...
Need help?
General
