Chapter 7. Input/Output Specifications
7-33
2) Wiring of XTB-40H and XGB extension modulet
Wiring of XGB extension module through XTB-40H and C40HH-10SB-XBE SLT-CT101-XBE is as follows.
At this time, relationship of XGB IO signal and Smart link board terminal number is as follows.
The following figure describes signal allocation when C40HH-10SB -XBE is used as connection cable.
When the user makes the cable, make sure that wring is done as figure below.
(SLP-T40P)
To Next Page