Chapter 1. Introduction
1-7
1.4 Usage notes according to compatibility and O/S version
Describes matters that require attention for use depending on the product O/S version.
(1) XG5000 - CPU module (XEC-H)
In case of CPU O/S V5.00 or higher, you must download the program using XG5000 V4.71 or higher version.
CPU O/S Version Function
XG5000 Version
Less than V4.71 V4.71 or later
Less than V5.00
Read program
Monitor
Write program
Online editing
CPU O/S Version Function
XG5000 Version
Less than V4.71 V4.71 or later
V5.00 or higher
(Renewal)
Read program
Monitor
Write program X (not supported)
Online editing X (not supported)
Remark
▪ If an unsupported operation is attempted, the XG5000 outputs a NAK message window and
does not process any more write operations. It exits on failure, leaving the old program intact.
▪The details of compatibility between versions are described in Section 1.4.
To Next Page