121
I
1. Externals
It interlocks with the mechanism of circuit breaker
and indicates the status that the circuit breaker is
ready to do closing operation.
When mechanism is in OFF position or in CHARGE.
Contact is output with ONand it indicates that
mechanism can be closed.
2. Installation Method
1) Put ready-to-close contact into the inserting/assembly hole of mechanism.
Ready-to-Close Contact
2) Tighten with M4 bolt by using wrench.
AContact
Assembly
Hole
Inserting
Hole
Contact Part
4. Optional Accessories
Accessories
To Next Page
Loading...
