LS Industrial Systems SV015iC5-1F - Accel;Decel time and unit setting

9. Basic functions
9-4
SV-iC5
 Frequency setting via Potentiometer on the keypad + Current Analog input (0-20mA)
Group LED Display Parameter Name
Set
Value
Min/Max
Range
Factory
Defaults
Unit
Drive
group
0.0 [Frequency Command] - - - Hz
Frq [Frequency Mode] 5 0/8 0
 Select Frq – [Frequency Mode] to 5 {Potentiometer on the keypad and Current Analog input (0-20mA)}.
 Override function is provided via Main speed and Auxiliary speed adjustment.
 Related code: I 1 - I 5, I 11- I 15
 When main speed is set via potentiometer and Auxiliary speed via 0-20mA analog input, the override
function is set as below.
Group Code Parameter Name
Set
value
Units
I/O group I 2 [V0 input minimum voltage] 0 V
I 3 [Frequency corresponding to I 2] 0 Hz
I 4 [V0 input max voltage] 10 V
I 5 [Frequency corresponding to I 4] 60.0 Hz
I 12 [I input minimum current] 4 mA
I 13 [Frequency corresponding to I 12] 0 Hz
I 14 [I input max current] 20 mA
I 15 [Frequency corresponding to I 14] 5.0 Hz
After the above setting is made, if 5V is set via potentiometer and 10mA is applied via I terminal, 32.5Hz is output
 Frequency setting via 0-10V + 0-20mA input
Group LED Display Parameter Name
Set
Value
Min/Max
Range
Factory
Defaults
Unit
Drive
group
0.0 [Frequency Command] - - - Hz
Frq [Frequency Mode] 6 0/8 0
 Set Frq – [Frequency Mode] to 6 {V1 + I terminal input}.
 Related code : I 6 - I 10, I 11 - I 15
 Refer to the Frequency setting via Potentiometer on the keypad + Current Analog input (0-20mA) for the
setting.